ΤΗΛΕΧΕΙΡΙΖΟΜΕΝΟΣ ΔΙΑΚΟΠΤΗΣ ΑΣΥΡΜΑΤΟΣ ΜΕ ΤΗΛΕΧΕΙΡΙΣΤΗΡΙΟ ΜΕ 1 ΡΕΛΕ 1 CH DC 220V 30A – OEM YSS009

Ασύρματος τηλεχειριζόμενος διακόπτης με δύο κουμπιά στο τηλεχειριστήριο και με 1 ρελέ στην πλακέτα κατάλληλο για λειτουργίες γκαραζόπορτες, ασύρματα σύστημα τηλεχειρισμού, λάμπες κ.λ.π εύκολο στην εγκατάσταση και εύκολο στη χρήση, ασφαλές και αξιόπιστο.

AC220V 30A Relay Receiver ( have better load less than 25A)

315/433MHZ Optional

Input AC220V Output AC220V

1.Working Voltage: AC220V +- 10%

2.Max Load:30A Relay, Resistive load≤25A, Inductive load≤20A

3.Channel: 1CH

4.Working Frequency : 315MHZ/433MZH Optional

Receiver sensitivity: : -105Db

Working temperature : -10’C – +60’C

Output way : Momentary. Toggle .Latched Adjusted by Jumper

Code type: Learning code Add Controller by the Learning Button on the receiver

Output State:

It is adjusted by the Jumper on the Receiver Board,

A: Momentary———–Put the Jumper on 1 Pin or take away the Pin

B: Toggle————put the Jumper on “1&2”

C: Latched————- put the Jumper on “2&3”

Momentary————Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF,

Toggle—————Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF,

Latched————Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF.

Learning Code

Input AC220V for the Receiver ,the receiver power indicator ON, Press the Learning Button until the Led indicator OFF. Then press transmitter, the Led indicator flash for 3 times, it mean learning successfully.

Clearing Code

press the Learning Button and hold, the LED indicator from OFF to ON, it means clearing is successfully.